All oil based metalworking oi
Product introduction
Refined mineral oil is used as base oil, mixed with extreme pressure, anti-wear, oily, anti-oxidation, anti rust and other additives.
Characteristics of excellent performance
It is suitable for lubrication of various high speed deep hole drilling machines. No. 1 can be used for drilling, turning and broaching of alloy steel, stainless steel and other difficult to machine materials.
Main technical specifications
matters needing attention
Refined mineral oil is used as base oil, mixed with extreme pressure, anti-wear, oily, anti-oxidation, anti rust and other additives.
Characteristics of excellent performance
- It is made of refined mineral oil as base oil and various additives such as extreme pressure, anti-wear, oiliness, anti oxygen and anti rust.
- Good lubricity, cooling and extreme pressure.
It is suitable for lubrication of various high speed deep hole drilling machines. No. 1 can be used for drilling, turning and broaching of alloy steel, stainless steel and other difficult to machine materials.
Main technical specifications
| project | quality index | test method | |
| 1 | 2 | ||
| Kinematic viscosity（40℃）/(m㎡/s) | 19.0～25.0 | 10.0～12.0 | GB/T265 |
| Flash point (closed)/ ℃ | 160 | 130 | GB/T261 |
| Freezing point / ℃ | - 8 | - 8 | GB/T510 |
| Moisture (%) (mass fraction) not more than | GB/T260 | ||
|
Maximum no bite load（PB）/N |
920 7840 |
882 7840 |
GB/T3142 |
| Corrosion test (45 × steel sheet, 100 ℃, 3H) | qualified | qualified | GB/T378 |
- Water and impurities should be prevented from mixing during storage, transportation and use.
- Don't mix this product with other oil products