Product introduction
Refined mineral oil is used as base oil, mixed with extreme pressure, anti-wear, oily, anti-oxidation, anti rust and other additives.
Characteristics of excellent performance

• It has excellent cleaning, cooling, extreme pressure lubrication and anti microbial properties,
• It has excellent heat aging resistance and rust resistance. It is not easy to rust after processing.
• Excellent extreme pressure lubrication, can extend the service life of the tool, and the surface finish of the machined workpiece is good.
• Good emulsion stability and antibacterial properties.

Product use
It is suitable for rolling and cutting of metals and nonferrous metals.

• The concentration is 5-10 % 

Main technical specifications

project		quality index	Test method
Concentrated solution	appearance	Transparent liquid	Visual inspection
	Kinematic viscosity（40℃），mm2/s	34.5	GB/T265
	Flash point (closed)，℃	180	GB/T261
	Pour point, ℃	-12	GB/T3535
	storage stability	adopt	NFT 60-197
	Maximum no bite load(PB),N(Kgf)	686   (70)	GB/T3142
Diluent	Emulsion stability （15℃∽35℃，24h） mL  Soap / oil	0.5 /	SH/T0579
	Monolithic / laminated	24	SH/T0365/2
	Salt allowance,	No phase separation	SH/T0365/3
	Emulsion corrosion test (55 centigrade positive and negative: 2 c), H steel sheet	48	SH/T0365/4
	Copper sheet	4
	Aluminum sheet	4
	(10min) ,mL	2	SH/T0365/5
	Antibacterial test	adopt	ASTM D 3946
	toxicity test	Non toxic and non irritating	GB7979
	Processability	report	FALEX-8

matters needing attention

• Water and impurities should be prevented from mixing during storage, transportation and use.
• Don't mix this product with other oil products